Voron0 HEPA Exhaust Filter for Top Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter Enclosure using 4 small HEPA filters and some activated carbon foam sheets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Simple removable HEPA exhaust filter that easily mounts to the top hat by replacing one of the side or back acrylic pieces.
You will need:
1x 24V 80mm fan
1x M3x6 Screw
4x of these filters: link or any other filters with 80x40mm dimensions
Some activated carbon foam sheet: link, there is room for 5-6mm thick foam.
You may have to play around with the tolerances a bit to get it to fit together properly with your printer and settings. For me everything fit together nicely and the fan fits snug enough to not need any glue.
If you encounter issues with the seal fitment, try scaling it down by 1mm on each side in your slicer.
Print all parts except the seal in PETG and the seal in TPU for best results.
You only need support for the horizontal support beam in the filter housing (print with the bigger side facing down).
The screw holding together the fan mount and the filter casing is entirely optional, everything should hold together nicely just by the friction of the 2 seals.