Orbiter 2.0 Prusa IR Filament Sensor Addon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick remix of my previous Prusa IR Sensor mod for the official Orbiter v2.0
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 1668
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a quick remix of my previous Prusa IR Sensor mod for the official Orbiter v2.0. I used one of the upper mounting holes in the Bear X-Carriage to mount the Prusa IR filament sensor from the MK3S. I have been using this filament sensor and it works well even with flexible filaments.
It weighs less than 5g assembled and requires no custom parts other than half of a pen spring for the sensor arm. You will need the original M2 screw to secure the case together, and a 12mm M3 screw and square nut to mount to the Bear X-Carriage.
Extruder mount can be found here: https://www.prusaprinters.org/prints/109068-orbiter-20-prusa-bear-extruder-mount-for-mosquito-
This was specifically designed using the Bear X-Carriage and has not been tested with any other version.
Category: 3D Printer Parts