1 / 8
Vault-Tec Headphone Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
My new PC set up is all Vault-Tec themed and wanted a headphone stand to go along with it. So I thought there would be some of you out there for wanting something like this, So here you go friends. Enjoy.
Assembly is pretty straight forward:
Pillar goes into base recess. (depending on how tight you have your tolerance it may need a little super glue.)
Front and back of the headset rest presses together. (Again, as stated above, may or may not need some super glue.)
Once the headset rest is pressed together, slide over the pillar. (After placed on the pillar, this does not require glue, it will set nicely. )
ENJOY!