1 / 4
Liligo T-A7608E-H case with FreeCAD file
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Liligo T-A7608E-H PCB (mobile net and GPS with battery conpartment) case with FreeCAD file.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
I created a GPS tracker project in GitLab: liligoa7608-gps.
I needed a case for a Liligo T-A7608E-H board and here it is.
You will need additionally:
- 6 pieces of M3x35 screws
- 2 pieces of M3 nuts, those goes into the corners' of the box's bottom body.
I printed it with:
- 0.2 layer height
- 0.4 nozzle
- 3 perimeters
- 4 top and bottom layers
- PETG
- no supports
I cut the sponge in half I received inside the case the device was delivered and I placed it into the top and bottom of the box.
Files
PCB frame
- Top: TopBody
- Bottom: BottomBody
Case
- Top: BoxTopBody
- Top with hole for on-off switch: BoxTopWithOnOffBody
- Bottom: BoxBottomBody