Sovol SV08 XY 3D Printed Gantry AB Stepper Holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of the of the AB Stepper Holder that CN3D released, for easier printing.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 229
- Wydruki
- 2
- Wyświetlenia
- 2331
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the of the AB Stepper Holder that CN3D release. For easier printing. I split the lower section heated insert section to be a separate section. This allows the lower to be printed without any supports and have a perfect finish on both sides
Material: Polymaker ASA Pop Green - Extruder 275c* Bed 100c
- *REVO HF Obxidian .04* Set your printing temperature for your printer.
Print Settings: 3MF has these settings set, adjust as needed ORCASLICER 2.2.0
Printed on West3d Super Stick build plate, no glue needed.
.25 first layer
.20 all other layers
8 walls (highly recommend for better clamping loads)
5 top and bottom layers
single wall top and bottom
35 % Cubic
inner/outer/inner
reverse on inner
precise wall
precise z