Sovol SV08 XY 3D Printed Gantry X Beam Holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clearance'd X Beam holders for stock print head and mini SB. X end stop and switch holder added.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 195
- Wydruki
- 1
- Wyświetlenia
- 1827
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of the X beam holders that CN3D released for their SV08 3D gantry. I had clearance issues with the stock tool head hitting these when printing edge to edge. I also had clearance issues with the top hitting the Mini Stealthburner I was using. I made the clearances needed and mirrored them. I also added clearance for the wider Gates pulleys to fit and corrected the clearance issue on the right holder where the lower stock pulley was rubbing. I also added an X end stop tab on the right side as there was no provision for my print head setup. I have included a version for the stock print head that uses the X end stop and switch holder also made by CN3D.
This is a 3MF file and the modifications are shown as solids! Slice the files and you will see the final product.
Material: Polymaker ASA Pop Green - Extruder 275c* Bed 100c
*REVO HF Obxidian .04* Set your printing temperature for your printer.
Print Settings: 3MF has these settings set, adjust as needed ORCASLICER 2.2.0
Printed on West3d Super Stick build plate, no glue needed.
.25 first layer
.20 all other layers
8 walls (highly recommend for better clamping loads)
5 top and bottom layers
single wall top and bottom
35 % Cubic
inner/outer/inner
reverse on inner
precise wall
precise z