Multi Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This roller is sturdy and easy to print without suports. It can accomodate various spool sizes from 45 to 100mm ( 1-4in)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
update: after extensive use one bearing pin broke. I suggest to print it 4-5 perim with 30% + infill
Ideally this is printed in Petg (Pla should work but untested) with 2 perimeters or more without supports. It barely fits my prusa mk3 bed, so if you want to make a bigger version you will need to slit it.
Print settings
Nozzle size ......................... 0.4 mm
Layer height ....................... 0.2
Number of perimeters ... 2
Infill ...................................... 20%
Supports ............................. none
Bed surface ......................................... glue stick
Hotend temp ...................................... 240c
bed temp .............................................. 80c
Materials used: .................................. PETG
Additionnal parts
4x bearings 8mm inner diameter x 22mm outer diameter (608zz)