Hose holder for Bob the Dishwasher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder designed to hold the hose for Bob the Dishwasher.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder designed for holding the hose for your Bob. I made a couple of different designs with varying thicknesses, and this version seems to work perfectly (been using it for many months without failure).
A piece of double-sided tape fixes it securely to the side of Bob (or some other surface you find suitable).
It works fine with PLA, but since it is hot water running out of the hose, it might be better to use PETG/ABS (I had a thinner design that got a bit deformed over time due to the heat, but this version is thicker and works fine for me in PLA).