1 / 1
Omnipod syringe to insulin vial coupler (TPU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original coupler, intended to be printed in TPU.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
The couplers in the image were printed on an MK4S using SainSmart Shore 95A TPU. This type of TPU is flexible enough to wrap around the opening of the vial (tip: insert the vial into the coupler at an angle), but firm enough to hold it snugly in place.
In PrusaSlicer, I just used the SainSmart TPU filament profile and it printed great (0.2mm STRUCTURAL print settings). Print upright like in the picture; no supports needed.
