Yakima FullSwing Removable Number Licence plate Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Number/licence plate for your Yakima Full Swing Bike rack. This model also allows swappable number plates!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v3.0
Replace the bottle opener on your Yakima FullSwing bike rack with a removable number plate adaptor.
Only post processing steps required is to install the 4x M5 heat set inserts. I used CNC Kitchens.
Optionally I have provided 2x 25x10x3mm magnets for storing the numberplate unattached to the bike rack. Actual magnet slot dimensions are 26x11x3.8mm
Steps to install:
- Unscrew original screws.
- Pull old end cap off.
- Push fit the new end cap.
- Reuse existing screws to fix the adaptor on.
The adaptor bracket is for an Australian NSW/Vic Bike rack number plate.
Step files for the adaptor are avaliable to allow modification for worldwide number plates.
Feel free to contact me with world wide number plate hole dimensions and i will try to adapt to other number plates.
Printed with a .6 nozzle, 20% gyroid infill & 5 walls.
I printed this in Siddament PCCF. This is a beautifully rigid filament.
No supports needed! Print in orientation shown.