Pulley meant to hang from a rope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pulley that is printable with no extra hardware
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A simple pulley that is printable with no extra hardware which I hang from the ceiling of my garage. I am ~200lbs and can swing from the pulley with no issues. I will be adding 2 and 3 pulley designs soon.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
100%
Filament:
Any PETG
Notes:
I printed in PETG at 100% infill. The bearing is a little tight using PETG so PLA also works for it.
Print the shaft with the lip facing up. This will align the layers in an optimal direction. The bearing has a rectangle hole to enforce this.
Post-Printing
Put shaft through harness and gear. Use the "c clip" to secure it in place.
Category: Tools