1 / 6
AEG blower mounting bracket — zdjęcie 1
1 / 6

AEG blower mounting bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall bracket to fit AEG 18v fusion blower.

Ocena
0 / 5
Polubienia
6
Pobrania
51
Wydruki
0
Wyświetlenia
347
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

Designed to hold AEG 18v Fusion Blower. 

Mounted vertically on brick or timber wall.

The latch/pin has a little knob on the end to glue on after its been inserted into hole. I used pla+ for the prototype, has held up well so far. All dimensions are pretty good and easy to hook on and unhook without any dramas.

Tagi