Caverna Dwarves with Adventure Tracker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dwarves miniatures combined with the adventure tracker wheel
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked both the adventure tracker and the miniatures, so I smashed them together. You can track it either way you want.
This includes the whole set: 5 worker miniatures for each player + the 6th worker miniature
There aren't much special settings for printing. I've used 4 perimeter and 15% infill. 50% infill for the base. Obviously support needs to be added for the miniatures bottom. I've used just a little support on “Worker 1” for the shield, although it's probably not needed. All other workers printed without additional supports. I've used 0.15mm layer height, I wanted more details on the miniatures. I don't think there will be much difference if you use 0.2mm
I've included .3mf files. A color change gcode has been added when it switches from the base to the miniature. Similarity in the wheel, a color change has been added for the numbers.
NOTE: The two parts of the base aren't super tight, there is some tolerance there. Some fit great, some are a little loose. I super glued them all. Also the “clicking” mechanism on the adventure track doesn't work that great, at least in my prints, but it doesn't really matter