Siser Juliet and Romeo Plotter Tool Holder Small
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the idea of another Siser organizer box and recreated one for my wife, which can be stuck with double-sided tape
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rework of the https://www.printables.com/model/880420-storage-box-for-siser-blade-housing-and-blades-gri features 3 vertical blade housing holders. I can be attached to the Siser itself or to the shelf with double-sided tape.
I used generic PLA at 2.0 layer height with standard PLA settings.
This is a “tight”"fit. You may want to print with 101% or 102% if too tight depending on how well your printer is doing walls.
Idea for the model from https://www.printables.com/model/880420-storage-box-for-siser-blade-housing-and-blades-gri