1 / 10
Anbernic RG35xx H Skadis Mount — zdjęcie 1
1 / 10

Anbernic RG35xx H Skadis Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis Mount for the Anbernic RG35xx H handheld.

Ocena
5 / 5
Polubienia
15
Pobrania
91
Wydruki
1
Wyświetlenia
326
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Needed a Skadis Mount for my Anbernic RG35xx H.

The original model was to wide for the RG35xx H, which is why I remixed it to have a better fit. I just made it about 5mm narrower, it fits perfect now.

If you'd like to print the model upside down, many support structures are necessary for printing. It makes sense to print with two materials and to print the interfaces between the model and the supports with the other material. e.g. PETG with PLA. Since PETG and PLA do not combine, perfectly smooth surfaces can be created at the supportet faces.

Use the following guide from Manbo 3D for perfectly smooth support-interfaces.

A preconfigured .3mf file for a Bambulab x1c printer is included.

 

A preconfigured .3mf file for a Bambulab x1c printer is included.

Tagi