Harbor Freight HFT Volt Ohm Meter Stand & Magnetic Hanging Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide on multi-purpose stand and removable Velcro strap for magnetic holder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The stand slides on from the bottom and stops at the meters ridge near the top. It can be easily removed for battery change. The stand moves out to a 45 degree for better viewing angle. The 10mm x 3mm magnet glued into the stand is for the strap magnet, to keep it out of the way. This size hanger magnet can attach through the case to the battery making the stand be able to stand straight up. The strap is a piece of ½" Velcro cut to any length deemed necessary for your use. The two parts of the stand is screwed together with a 3mm x 25mm screw and nut. The hanger magnet uses a 4mm x 20mm countersunk screw and nut. The hanger magnet needs the be very strong because sometimes you need shear strength and not pull strength. I bought mine nearly 5 years ago from EBay. They were listed as: 10Pc Super Strong 90 lbs Neodymium Cup Magnet 1.26 Countersunk Round Base Mount. This is a very strong magnet, but you could use a lesser strength magnet.
Everything printed with PLA at 0.20 layer, 3 walls, 20 to 25 % infill