Raspberry Pi Zero W - Spotify CarThing Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for a Raspberry Pi Zero on your Spotify CarThing
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I installed Nocturne on the Spotify CarThing, since Spotify is bricking the CarThing in December. This currently requires a Raspberry Pi (Zero W or Zero 2 W) for use in the car so I needed to be able to mount the Pi. I am using the magnet connected to the CD slot mount in my vehicle, but I think this should work with any of the magnet based mounting options.
I used this model for the cover, but it isn't necessary if you don't want it.
The tolerances are a little snug on the magnet, but it was a perfect fit printed with my A1 Mini.
Printed with Printed Solid Jessie PETG in Black Soul Glitter