Tool for transferring silica gel into a bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool for transferring silica gel to a bottle without spilling after drying in a convection oven
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 187
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I use silica gel to keep the filament dry. However, I often spill the beads when returning them to the bottle after drying them in a convection oven, and it hurts to step on the ones that roll onto the floor. So, I made a funnel to help put them back in.
When I started using a new type of silica gel, I found the bottle diameter was different, so I added a new funnel (37mm diameter) to go along with the original one (43mm diameter).
Original model: parts for 3DP v3.3mf is for 43mm diameter
New model: silica gel collector 36mm is for 37mm diameter
Happy printing!