Concealed AirTag Mount for Bike Rear Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AirTag holder with screw thread to fit behind a bike's rear light. Designed specifically to fit a Kalkhoff e-bike.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to be as un-obvious as possible to thieves, and attach to the rear light mount on a Kalkhoff e-bike without any modification or additional hardware.
It should work on any similar bike with screw holes roughly 49-50mm apart.
The base is quite thin so that everything would still screw together without any additional parts - but some thread locker may be ideal.
The container itself has some allowance made so that the threads print well. It's reverse threaded just so that anyone who does notice it has a (very slightly) more difficult time dismantling it.