Flashforge Adventurer 5M Pro Side-Mount Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts on side of printer; slots for glue and stylus/etc. facing toward the user, one for wire-cutters in back.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 401
- Wydruki
- 0
- Wyświetlenia
- 2168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A simple tool holder that mounts to either side of the Flashforge Adventurer 5M Pro, with front slots for glue and a stylus/etc., and a rear slot for wire-cutters/pliers/etc. There are files for mounting on both the left and right. It's suggested to print on the model on its side, with the glue and stylus slots on their side facing down for maximum smoothness of the both the handle and the part that faces the user (assuming the bottom layer is nice enough.)
I used OrcaSlicer's “Tree” Supports, and checked off “On build plate only” (otherwise you have to dig through a huge forest of unnecessary supports, potentially breaking a side of the model in the process) and printed with Flashforge's Burnt Titanium filament, using a 0.6mm nozzle at 215°C for the first layer/210°C for the rest, and the bed at 65°C for the whole print. Came out looking like a dream.