1 / 9
Ford display phone holder (for raised up 8" diplays) — zdjęcie 1
1 / 9

Ford display phone holder (for raised up 8" diplays)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ford display phone holder (for raised up 8" diplays)

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I have tried other models of same kinde stands, but none of them suited me well enough, so I decided to make my own. 

Works for all raised up Fords 8" displays (sync 3/3.5/4)

The phone stand has a magnetic end cap that I purchased separately which is universal but can be replaced with a MagSafe magnet or MagSafe charger that fits a 13mm round head (or just print any round head size you need).

I used that magnetic end https://www.aliexpress.com/item/1005007774643758.html?spm=a2g0o.detail.similar_items.1.2a5ctKhvtKhvsk&utparam-url=scene%3Aimage_search%7Cquery_from%3Adetail_bigimg&pdp_npi=4%40dis%21EUR%218.98%214.31%21%21%2166.96%2132.14%21%40211b6c1917330797234827286ecedf%2112000042160000389%21sea%21BG%210%21ABX It's cheap and works well.

I also used 6 bolts with dimensions M 3 x 12 (the head is 5mm with an internal hex) and 4 nuts.

The entire interior is covered with 1mm leather for better grip and to prevent scratches on the display.

The stand fits perfectly and sits firmly.

Printed in PLA (head printed ot PETG or PLA tough just in case) with 0.2 mm layer.