120ml spice jar sliding pull-out rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull-out spice rack tailormade for 120ml spice jars
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 857
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Made for 120ml, 44x44x105 outer dimension jars, lids are 42mm diameter
Labels of about 25x50mm fit nicely, e.g from Avery
I used these:
https://www.amazon.de/-/en/gp/product/B0CVHHPGH8/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Fits 10 jars in a 2x1 configuration (referred to as a standard module) each
Outer dimensions of a standard module:
- 260mm depth, 310mm tall, 56mm wide per unit (to carry 10 bottles)
Other hardware needed per unit:
- 1x ISO 7379-5-M4-12 shoulder screw
- Has a wide head alleviating the need for washer, and a 12mm long 5mm diameter shaft which is great for allowing smooth rotation. Finally, the end is an 8mm long M4 thread
- Examples: Amazon link, Misumi link
- 1x M4 locknut
- 8x M3x8 countersunk bolt (e.g. ISO10642) to attach units/top caps
- 3x 3mm diameter short countersunk screws (20mm recommended) for mounting
Tested at 100% scale with 0.2mm layer height on Bambulab P1P with white Bambulab PLA
STL, STEP and F3D available for download/modification
Anyone can use for any purpose - re-designing, selling kits or anything else