Happy Dance Snoopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Snoopy Happy Dance that made its television debut in “A Charlie Brown Christmas”.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 607
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Happy Dance Snoopy: The Snoopy Happy Dance that made its television debut in “A Charlie Brown Christmas”. The fully assembled model is ~195 mm tall and is scaled to Schroeders MP3 Player Piano and the Charlie Brown Christmas Stage.
12/3/2024 Update: collar stl uploaded.
---------------------------------------------
Print Instructions:
- Resolution: 0.2 mm unless noted.
- 10% fill (grid) unless noted.
- Sliced with Cura
White: eSUN PLA+ White
- Body (Tree support 75° was used for bum, right leg, and tail hole)
- Head (Normal support 75° [Grid] was used for neck and mouth)
- Arms L and R
- Tail (print with arms and arm pins to ensure the very tip of the tail doesn’t get deformed)
- Arm pins (2)
Black: eSUN PLA+ Black
- Ears (2)
- Eyes
- Eyebrow
- Nose
- Smile (Normal support 75° [Grid] was used)
- Spots (body and tail)
Red: Ziro Silky Red
- Collar
-------------------------------------
Assembly: The eyes, ears, eyebrow, nose, collar, and tail spot did not need gluing. Glue the arms, body spot, and tail (with tail spot in place) to the body. Glue the smile to the head, clamping on the smile ends. After all the pieces are dry, slip the collar over the neck and glue the head into place. There is intentionally wiggle room to have the head at an angle that you prefer. After the head adheres to the body, the eyes, eyebrow, nose, and ears can be popped into place.