1 / 1
Prusa XL modified CoreXY-back parts for new O-rings incl. front CoreXY for heatset inserts — zdjęcie 1

Prusa XL modified CoreXY-back parts for new O-rings incl. front CoreXY for heatset inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed corexy-back to match the updated models for new O-rings Added modified corexy-front parts with heat set inserts

Ocena
5 / 5
Polubienia
15
Pobrania
58
Wydruki
1
Wyświetlenia
594
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Update 2024-12-30

Added the Front CoreXY parts with heat set inserts

corexy-front-left-r5_mod

corexy-front-right-r5_mod

 

Update 2024-12-13

Updated the top parts left and right sides: added a missing screw hole (for heatset insert)

corexy-back-left-top R5_mod_v2.stl

corexy-back-right-top R6_mod_v2

 

This is a remix of the great mod with improves the robustness of the motormounts.

I updated the geometry so it can be used with the updated O-Rings solution.

Original printing suggestions:

Bottom: PC_CF or PA_CF, for 0,4mm nozzle use 7 perimeters, 25% grid infill

Top: PETG(PETG_CF); for 0,4mm nozzle use 7 perimeters, 25% grid infill

HW needed:

  • 2 sides x (3) M3 x 15mm thru 25mm socket head cap screws
  • 2 sides x (3) D3 (3.4mm actual) spring roll pins, min 10mm length, I used 14mm
  • 2 sides x (8) M3 heat set inserts (for 4mm hole) 

Kudos to the original designers!

Tagi