Shoe screw jewel

Summary

I developed this model to highlight the beauty of shoes, whether they’re conventionally elegant or uniquely distinctive. It offers a range of shapes to suit your personal taste. Additionally, you can select your own design to perfectly match your preferences.

Print settings

It is necessary to add supports in the models that I did not add. Everything that needs to be supported is shown with this suffix: "supports are needed".

The width of the nut is 6.27 mm

The length of the nut is 6.27 mm

The height of the nut is 2.22 mm

Everything below applies only to the nation itself, and not to the form above it. (The size of the shape above it can vary depending on the shape.)

The width of the screw is 10 mm

The length of the screw is 10 mm

The height of the screw is 10.33 mm

Estimated printing time: 18 minutes

Need to print in high quality

Filling density 15%

The amount of the filament is 0.3m

The number of layers is 103

The printing speed is 110mm/s

Nozzle Temp: 200 (varies depending on the type of filament)

0.4 nozzle

It is recommended to use the Creality Print slicer.

I printed the model in Ender 3 S1 pro, but you can use almost any printer to print the model.

The advantages of the model

1. You can leave the screw in the shoe, and not take it out every time you want to change the shape of the nut.

2. You can choose nationality shapes from a wide variety of shapes.

3. The model is small, it does not waste much filament.

4. The model is suitable for almost any type of filament

5. Little printing time

Assembly instructions

Insert the screw into the eyelet of the shoe

Then take the nut and turn it clockwise on the screw

If it sticks out too much, push it in with a clicking sound

If you want, you can place it on all of the eyelets, like I did:

https://youtu.be/Qou3IODAuGA?si=EuBw8Q3jmbXrDbnM