Push to connect fitting - 1/4-18 push to connect fitting for pneumatic and liquids.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm working on printing push-to-connect fittings for compressed air and liquids (not under pressure).
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 242
- Wydruki
- 0
- Wyświetlenia
- 1205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
THIS PROJECT IS WIP. PICTURES AND MODELS WILL BE UPLOADED AS THEY ARE TESTED.
This is the first of many push-to-connect fittings designed to carry compressed air or low pressure liquids. These are designed to be print-in-place, but also can be disassembled if needed, or additional parts printed separately.
Right now I am starting with NPT threads because these are the most common for these fittings, and I'll likely start with bigger threads and work my way down to metric and smaller hoses too.
The fittings are designed to be hermetic (and pressurized if included with an appropriately installed O-ring.
First update:
- Push to connect fittings work as print in place with minimal/no supports and grip tube as intended. Not as springy as metal versions but that's acceptable.
Upcoming development:
- Metric tubing sizes and smaller thread sizes (NPT 1/8")
- Actual pressure and hermeticity testing with compressed air
- Pressure testing with liquids (might just pull a vacuum and detect leakage)
Comment if you'd like additional features.
This is designed around this product set: https://www.mcmaster.com/products/push-to-connect-tube-fittings/universal-thread-nickel-plated-brass-push-to-connect-tube-fittings-for-air-and-water/