1 / 2
Grinch Wall Hanger (Resin Supported and Unsupported) — zdjęcie 1
1 / 2

Grinch Wall Hanger (Resin Supported and Unsupported)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a digitally altered version of the awesome Christmas ornament by Vlado Turek. Edited & shared with his approval.

Ocena
0 / 5
Polubienia
16
Pobrania
104
Wydruki
0
Wyświetlenia
313
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Share Alike

Giving a little back to the 3D Printing community that’s given so much to me freely over the years.

=_=_=_=_=_=_=_=

This is presupported for resin printers. Note that, when supporting items with a flat back/bottom like this, I opt for HEAVY supports. I’d rather have pock marks on the back of a successful print than failures on one that was delicately supported. See pics for details (taken before final cure).

This file can be sized up or down (within reason), and these supports should still be successful. They usually are.

=_=_=_=_=_=_=_=

Printed on an AnyCubic Mono X at 80% power.

First 6 layers @ 25 seconds, 1.7 seconds per layer after that.

I use a 50/50 mix of AnyCubic's "ABS-Like Resin Pro 2" and "Rigid 100 Resin".

=_=_=_=_=_=_=_=

I also added a copy of the file without supports, in case you want to do your own or someone wants to try something with an FDM printer.

Enjoy!