2004 Odyssey cup holder bushing for Stanley tumbler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup holder adapter for Stanley tumbler for 2004 Honda Odyssey
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I just went a road trip recently, and my wife brought her Stanley cup (because of course), and I thought it would fit into the standard issue Honda cupholder, because it has the pads and the two different sized spaces in it.
It did not. It was about a millimeter too large. Consequently, it constantly wobbled and tipped, and spilled. It had to be held for the entirety of the drive, and was maddening.
So I took some measurements and crafted this little beauty:
Which sits in nice and flush
And makes it impossible for the Stanley to tip over.
I made it for my ‘04 Odyssey; it might fit other models. If it doesn’t out of the box (i.e., printing the STL directly), I've also uploaded the FreeCAD project I made it in so you can make adjustments as necessary. Mind you, the cup and the cup holder are both slightly conical.