Full Size Velociraptor Socle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the base for the Inhuman Species Velociraptor
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
The socle by inhuman species looks great in photographs, however the joints between the parts had very sloppy tolerances, and this left the entire base far too flexible and difficult to assemble correctly. I've taken the time to merge all of the bottom pieces into a single STL file that can be cut up however anyone wishes to do so (trust me it was a real pain to get it to this point). the original cuts were made to fit on a small printer like a prusa mini. If you have a bigger printer, you can now cut it to fit your printer better and wind up with a stronger base that is easier to print. The strongest joints are no joints at all. If you have an orange storm giga, that would give the best possible results.
I've included a 9 piece modular cut with decent tolerances designed for printers with a 300mm x 300mm build plate such as a sovol sv08, ender 3 max neo, longer lk5 etc. Also included is a 8 part cut for the prusa xl.
These cuts may or may not have enough connectors for your taste. these are merely suggestions and or examples of what might be possible.
A plastic welder with staples is probibly the best way to join these. print with 4 perimiters for extra strength.
The rest of the parts are available at the link below
https://pinshape.com/items/43937-3d-printed-full-size-velociraptor-skeleton-socle
This is in no way officially endorsed by InhumanSpecies, I post it here as per the attribution license the original file was posted under.
When I have time I will update this with a one piece file for the top cover, and upload whatever other parts might be needed