Bitcoin Cold Wallet - Mneumoic Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Bitcoin 24 word tumbler storage. The idea is that you only need the first 4 letters of each word for the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a Bitcoin 24 word tumbler storage.
The idea is that you only need the first 4 letters of each word for the words to work. Lots of information online about this.
You will need to print 8 cogs as there are 4 chars per side. Then you print in batches the total letters you need. I did this in big blocks so there was still no way to know what words i was making. The letter chips will snap into the cog. I printed this with a Prusa so my tolerances where very clean. If you have a messy printer you might have to resize to get this all to fit.
I then used the nutstick to push a nut into the hole and use a M3*20 bolt with nut to secure the two ends together.
Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2
Infill:
15%
Filament:
N/A PLA
Category: Other