Metabo Track Saw Fine Adjustment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fine adjustment for the KT 18 LTX 66 BL (Metabo Cordless Plunge Saw) in conjunction with a Makita guide rails.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
If you use a KT 18 LTX 66 BL (Metabo Cordless Plunge Saw) in conjunction with a Makita guide rail, but find that the stock precision adjustment leaves too much play. As you may know, the Makita track has a slightly narrower guide extrusion, and the fine adjustment on the Metabo saw, doesn't have an adequate range.
Use these replacement pieces to ensure a tighter fit.
Simple install - requires two per saw.
Instructions:
1) Remove original plastic pieces (as shown), by removing screws.
2) Replace with printed piece, and tighten screw.
3) Retain old pieces to ensure compatibility with non Makita tracks.
x 2
Note: original piece allows use of Bosch tracks. The replacement piece is a simple design that only supports FS compatible tracks such as Makita. Also, as these pieces are larger than the original, it may no longer work for Metabo, or Festool tracks.