Pixhawk 6C Mini (+optional RPi Zero) mount for a 30.5 x 30.5 mm stack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a Pixhawk 6C Mini, and optionally, a RPi Zero companion to your 30.5 x 30.5 mm flight stack
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Pixhawk 6C Mini doesn't have a traditional 30.5 x 30.5 mm flight stack mount, instead opting for a zip-tie or adhesive-based mounting, with the recommendation of mounting a flat plate above your stack, and fixing the controller on top with double-sided tape.
This mount allows you to bolt it to your stack instead, and then secure it from both sides with zip-ties and covers. This provides better protection for the controller, and enables you to remove it more easily.
Optionally, it also allows you to mount a RPi Zero companion on top, and provides a vibration-dampening pad for printing out of Varioshore TPU.
This part has been extensively flight-tested and usability-tested for bench use (all connectors available as best as they could be).
Printing
Print out as you usually would a technical part, I used 4 perimeters.
If printing the pad, print out of Varioshore TPU at its most foam-y setting.