Pocket Hole Clamp Hack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hack for cheap ratcheting bar clamp to convert to pocket hole clamp
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A hack for the cheap 100mm (4 inch) quick release ratcheting bar clamp that converts it into a pocket hole clamp. Just remove the flexible jaw cushions and replace them with the matching pair to either end of the jaws.
Two type are included:
Single prong for perpendicular clamping
Two prong for side clamping
Included parametric f3d file to fit your own clamp.
To modify: Remove the rubber part of your clamp and measure the metal FACE dimensions. You can use Change Parameters, and in the Favorites ,replace the values based on your measurements.
You can then activate whether you want the double or single "finger" tip component and export parts to print.
Deactivate the Clamp End component as it is not to be printed.