Sink Drain Strainer w. Improved Drainage - Ø86 & Ø82
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sink Drain Strainer Remix with more holes in both Ø86 & Ø82. Functional, easy to print, and keeps sinks clog-free.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a remix of Guntxter's 82mm sink sieve, modified to an 86mm diameter by adding a lip for improved compatibility with my sink. Ive also added more holes to improve the drainage. It maintains the original design's functionality while ensuring a snug fit for sinks requiring slightly larger sieves/strainers.
Features:
- Diameter: 82 & 86mm
- Height: 34mm (Guntxter's said 30 but its actually 34 → No change)
- Easy to print and install
- Perfect for catching debris while allowing water to drain
Print Settings:
- Material: PETG recommended since it might be in contact with food and heat resistant
- Layer Height: 0.2mm
- Supports: None needed.
- Min wall thickness: 1mm
Maintenance:
- Regular Cleaning: Rinse thoroughly after each use to remove debris. Use mild soap and a soft brush to prevent buildup.
- Deep Cleaning: Soak in a vinegar-water solution monthly to dissolve hard water deposits. If you make it out of PETG It can even be cleaned in the dishwasher
- Avoid Harsh Chemicals: Use non-abrasive cleaners to preserve material integrity.
Other models of interest:
Sink Drain Strainer with Plug - Sink drain strainer (Ø82 & 86mm) with integrated plug for easy water retention and clog prevention
Revisions
- 2024-12-03: Initial release of 86mm version with lip
- 2024-12-05: added 82mm version added more holes to improve drainage & removed lip and replaced by a smoother transition