1 / 4
The Legend Of Zelda (OOT) Triforce LED Lamp — zdjęcie 1
1 / 4

The Legend Of Zelda (OOT) Triforce LED Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An LED Lamp modeled after the Triforce from the legend of Zelda.

Ocena
5 / 5
Polubienia
7
Pobrania
26
Wydruki
0
Wyświetlenia
175
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a model I made in my 3d printing class and was made under a free fusion 360 account. Thats why it can't be sold or remixed and should only be used for your enjoyment. I hope that you like my designs, and please let me know if there are any issues, and please post your makes. I designed this originally to fit a circle led light from 5 and below that has a diameter of 90 mms. Feel free to modify this design to fit your LED light just please don't post or remix it, and don't sell it. 

  • Infill: 3%-10% I prefer Gyroid, but you can use any
  • Material: White Glow in the dark PLA for the base, and Yellow PLA or PETG for the cover
  • Supports: Only needed for the cover for some printers
  • Extrusion: Size .24 or higher depending on your nozzle size

MAJOR CHANGE

I noticed that the old pieces didn't fit together very good so I made updates to both parts. I also made the cover ½ so you wouldn't need to use supports because of the symbols. I hope that this fixes all potential problems.

Tagi