K1C 270 Hinges for 6mm PC Side Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1C 270 Hinges Remixed for 6mm PC Side Panels
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed for K1C with 6mm Lexan (PC) side panel(s). Roughly sliced together, you could definitely make them cleaner and with better tolerances. They are tight, I had to sand down a couple edges bc I made the tolerances too tight. I couldn't find any hinges for 6mm Lexan/Polycarbonate panels so this is what I put together using TianZi's awesome hinges for the k1 (K1 and K1C have slightly different hole spacing, this is for the K1C). I installed 6mm smoked gray Lexan/Polycarbonate panels to help with reducing side panel vibrations, increasing visibility, increasing insulation, increasing rigidity… and because why not.
Thanks to TianZi for the great original model. See original model for instructions.