CALB CA series LiFePO4 battery terminal cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a battery terminal cover for CALB LiFePO4 CA180FI and similar battery cells
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a battery terminal cover for CALB LiFePO4 CA180FI and similar battery cells. It's designed to fit the OEM CALB bus bars with the OEM bolts, washers, and locking rings, and includes a gap for a heat shrink ring terminal for your BMS leads.
I originally designed this for flexible TPU, but upon further research I learned that TPU is considered combustible, while PETG is not, so for my final version I printed these in PETG. With PETG the caps fit very well and will stay secure even without a bolt on the terminal, but with a bolt and bus bar they are actually very tight and secure.
If you would like a set of these printed for you, I also sell these on Ebay.
