1 / 4
Ryobi Magnifier Light Cover Magnetic Clamshell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Simple3D's original cover with the addition of a cover for the opposite side held in place with magnets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed Simple3D's cover at 100% in PETG and it fit great. I decided to add a second piece to cover the bottom side of the lens as well. I had 8mmx3mm magnets on hand, but I will include the step file and Fusion file in case you want to use a different size. The ones I used were a nice press fit, but I put a drop of CA glue in with them just in case.
With the white PETG the light can still be used with the cover in place without a significant loss of brightness.