Filament Storage Bracket for Menard's Shelving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need a bracket to help store filament? This is a great solution that is length customizable!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This filament rack bracket slots into the side of a Menard's Performax modular shelving end frame similar to the link below. You will need to print at least two. Additionally, two 7/8" diameter dowel rods are needed to span between them. Add some glue during assembly to keep the rods from shifting. The distance between brackets is customizable to whatever size end frame you have. A 24"-wide end frame will hold about 8-1 kg spools in it's ~21" span.
Printer:
Neptune 4 Plus
Filament:
Sunlu PETG
Top/Bottom/Walls:
5
Infill:
35%, Triangles. Did not test with less.