iPad Pro 13-inch Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model will fit the iPad Pro 13in OLED 2024 model.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This model will fit the iPad Pro 13in OLED 2024 model. I designed it to sit as low as possible on my desk with a decent angle to be comfortable to draw on with the ability for the cable to connect out the bottom and clear the edge of the dest. Ive been using this with sidecar to allow me to use EasyEDA with a pencil to design PCB's. The feet run back just far enough to not be tipsy but still has a small footprint. Its the first version, I have used it for a while and will be making another version that clamps to the desk because it would be better if the ipad was about 2 inches lower than it is. but for now its been getting the job done!