Gridfinity Credit Card Organizers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity credit card organizers for credit card sized cards. 3 sizes / versions. Magnet-ready and stackable.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Model Description
Do you have credit or debit cards that you may own but rarely use? How about airline and hotel loyalty cards? Grocery cards? Dining rewards cards? You get the idea…lots of credit-card sized cards that you don't necessarily use often…but you need to be able to get to them on those occasions when you do.
Model Variations
3MF file has 3 plates with the following variations:
- Three Full Size slots. Holds around 40 cards. 5x3 grid.
- Two Full Size slots. Holds around 25 cards. 3x3 grid
- Three Full Size slots + 1 mini / keychain card slot. Holds around 40 full size and 15 mini cards. 5x3 grid
All variations have magnet holes and are stackable! So if you need to hold more cards - print a few!
The exact number of cards each slot will hold will vary depending on card thickness and may be more or less than quoted above.
Printing Notes
If you can, just use the included 3MF file. But for those that can't / don't want to, here are the settings I used that worked well for me:
0.24mm layer height. 2 perimeters / wall loops. 10% infill using ‘Cross Hatch’ infill pattern (gyroid would also work great, but is slower). 4 top shell layers.