HSW directional clip OpenSCAD library with connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a directional clip intended to be used with Honeycomb Storage Wall creations. Includes bases and clip connector.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
OpenSCAD Clip for HSW
This is a library to make one-way clip-in inserts for use with the Honeycomb Storage Wall (HSW) system.
The clip has a built-in spring and the shape makes it much easier to push in directionally.
It is inspired by KYZ's V2 clips and gives OpenSCAD users a base library item to use clips in HSW designs.
Relies on the BOSL2 OpenSCAD library
Parameters within source allow generation of:
- hsw_clip: just the clip
- hsw_clip_with_hex_base: the clip with an HSW-compatible hexagonal base
- hsw_clip_with_rect_base: the clip with an HSW-compatible rectangular base
- hsw_clipconnector: a simple little connector to hold two neighboring pieces of HSW together
Source code maintained at https://github.com/geru/3d-scad-hsw-clip
Copyright (c) 2024 Hugh Kern @geru
See LICENSE.txt for licensing.