Raspberry Pi 4 / Pi 5 DIN Rail Mount with M3 Rivet Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i remixed this incredible minimalistic Pi4 DIN-Rail-Mount to use rivet nuts (M3)
- Ocena
- 4 / 5
- Polubienia
- 38
- Pobrania
- 333
- Wydruki
- 2
- Wyświetlenia
- 2204
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- BSD License
First of all - Thanks to uwearzt!
Also thanks for sharing the Fusion360-File. This helped a ton!
I modified his nice, minimalistic Din-Mount for the Pi4 / Pi5 a bit to use my M3 rivet nuts to fix the Pi4 without any Spacers and other stuff. Only four M3x10 screws - done.
I printed it in PETG with little support in the overhangs (holes for the rivet nuts), which are really easy to remove.
One Note:
To mount the Pi I had to enlarge the holes by 0,5mm. I simply tapped through the existing ones, which still have more than enough clearance for the screws without touching any electronics, as you can see on the picture.
maybe one time i edit this for the usually used 2.5mm screws (simply modifying the width of the holes) to use rivet nuts but at the moment i just don't have any, so i made it work that way. anyway i am pretty happy how this turned out and i'll use it as is.
hope this is useful for someone else.
cheers! and happy printing!