1 / 3
Wandhalter / wall mounting holder for 18 V Batteries
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eine Wandhalterung für 18V Akkus Makita oder ähnlich.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Material: PLA+
Druckereinstellung: Layerhöhe 0,2 mm / Infill 100 % / Support 10% Tree teilweise
Kein zusätzliches Material erforderlich / no additional material required
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.