1 / 8
Buddhist Butsudan for Gohonzon - Soka Gakkai — zdjęcie 1
1 / 8

Buddhist Butsudan for Gohonzon - Soka Gakkai

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A butsudan almost entirely printed - except for the back that I liked to have made in wood.

Ocena
0 / 5
Polubienia
4
Pobrania
55
Wydruki
0
Wyświetlenia
451
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I recently started practicing Soka Gakkai Buddhism and I'm about to receive the Gohonzon scroll. I decided to design my own butsudan, so that is. It consists of 38 pieces designed to fit in a standard 20x20cm plate, with slots to easily assemble them. The butsudan measures are 56cm H x 43,2cm W x 19,5 D. This is a work in progress, someway customized (for example the doors have slots for the hinges I decided to purchase), and a couple of dimensions needs to be adjusted (exactly the holes for the doors and drawers knobs, which I'll tune when I'll purchase them). When writing, I'm still printing the components. I've found that the best compromise between printing speed and postproduction is to stay with a 0.16mm layer height or to use adaptive layer height (said that you'll probabbly notice minor differences between different layer heights). I haven't found metal pivots for the doors so also them are printed.

In the  Assembly Guide Stepfile folder I've placed an assembly showing how the pieces should be put together. 

For first should be put together the pieces in folders 01-04, then 05. After that assemble the doors (folders 06-07), print the pivots and place the washers (the two 1mm thick should be placed at the top of the left and right doors). Once doors are in place is time of folder 08.

The main body of the butsudan is ready. If you want to print the drawers too, you should put together parts in folders 09-10 before to glue them to the butsudan base. After that is time for parts in folder 11, finally the drawers.

Note: the holes for the knobs have a diameter of 4.2mm and 5.2mm, I still haven't purchased a knob so that dimensions have to be adjusted.

Fuxxer hinge's screw holes needs a little fillet in order to make them sticking at 0° when closed. 

I will update the work progress with new pictures :)
 

EDIT 2024.12.28 - Found a bug on the back wood panel, the right measures are 531x306mm. I'll update the related file and the assembly ASAP. The day has arrived. Today, I will receive the Gohonzon, and... my partner lent me her butsudan ^__^. The 3D printing process was long; I had issues with the printer and had to resort to some crazy post-production work... But the butsudan is practically finished now. Just a few more coats of paint and some sanding, and I'll be able to return the butsudan to my girlfriend. I also think I'll return the printer and buy a Bambulab or a Prusa instead. ;-)

EDIT 2024.12.31 - modified parts as follow:

  • Modified the knob with a new one, a real design with real dimensions;
  • modified the drawers, inserted a hole for the new knob for a better fit and better aesthetics;
  • fixed the back panel dimensions:
  • adjusted the dimensions of the drawers so now are 1mm shorter, so is easier to open and close them (better air flow). 

EDIT 2025.01.05

The butsudan is finally complete. Despite the dimensional accuracy problems of my machine, and the greater number of coats of paint I had to apply, the doors open and close smoothly and the final result is very satisfactory. 
 

BOM:

4x Door-frame magnets on Amazon;

8x Nylon washers Ø10x2mm (x6)/Ø10x1mm (x2) on Amazon;

4x Hinges 36x23mm on Amazon. Notice that I didn't checked the hinges orientation so them shows not the inlaid face but the plane one ^o^

For the illumination I’ve found that rechargeable led bar on Amazon, its leds are perfectly aligned to the butsudan’s center when the side of the bar with the buttons is touching one of the side frames  

Happy to see if someone would ever print it :)

Print settings:

  • 3 walls;
  • layer height 0.16 for the best speed/quality result, or adaptive (in orca 0.05 quality - 2 smooth);
  • infill cross-hatch 10% (tried 8% but wasn't satisfacted);
  • 4 top/bottom layers;
  • supports for slots and holes - used glue on plate;
  • prints laying on the larger faces - flat satin bed for better surfaces;
  • Pivots → 3 walls, 100% infill, 0.12mm Layer Height, brim;

Tagi