1 / 6
Candy Cane - Multicolor! (numbered and cut for coloring)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Candy Cane by @BeetleBuild. I cut the cane for better coloring and numbered the loose segments for assembly
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Remix of the Candy Cane by @BeetleBuild.
Two changes:
- I cut the cane into pieces so that a small section of the bottom can be colored, resulting in a fully colored cane.
- I made the cut pieces 0.4mm thick. Thus with 0.2mm layer height only two color changes are needed.
- I numbered the loose segments so that it is a little easier to assemble
- I did this mainly because the two almost identical pieces are not fully identical
Files:
EasyCane-cut-and-numbered.orca22.3mf: Exported from OrcaSlicer 2.2. Contains two build plates:- The main body, split to parts, pre-colored and numbered
- The loose parts with engraved numbers for easier assembly.
EasyCane-main-cut.stl: Contains the main body, split into parts. Should be usable and colorable in any slicer. Does not have the numbers (somehow the export with numbers failed), but they are not that important on the main body.EasyCane-Stripe-Group-numbered.stl: Contains the 5 loose parts with engraved numbers for easier assembly.