1 / 2
SOTABeams Carbon 6 EFHW antenna holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small holder for the SOTABeams Carbon 6 pole to hold onto your EFHW antenna wire
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 183
- Wydruki
- 2
- Wyświetlenia
- 1156
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (58)Powiązane
A simple clip to pass antenna wire through and to be held by a carbon 6 pole or pretty much any fishing pole with a decent enough top section (i.e. not the very fine squid pole types).
The simple version should be adequate for most applications but if you need a more robust solution then there's a version with cut outs for a small cable tie to add some additional strength.
detail and infill are not critical