1 / 1
Voron 0.2 X Carriage with Heatset — zdjęcie 1

Voron 0.2 X Carriage with Heatset

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Voron 0.2 X-Carriage modified to accept heatset inserts instead of M3 Nuts

Ocena
0 / 5
Polubienia
7
Pobrania
50
Wydruki
0
Wyświetlenia
296
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Compatible with 5.7mm or 4mm length M3 heatset inserts.

Hole has tighter tolerances to improve insert adhesion.

Before installing the carriage make sure the extra material ejected from installing the heatset insert is removed, ideally by running a long screw all the way through and with a scraper on the front face.

The part is designed to maximize insert retension with the excess plastic.