Activated Carbon Charcoal Air Purifier for 120mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create a simple and easy to print model to filter air from smell especially.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 729
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I came across the model of RevHazlett and the remix from Spifer and decided to create a remix as well minimizing the design and making it a bit more suitable for my needs.
Printing:
For the Fan Cover simply remove all solid surfaces and create the infill density to your liking. In the Model shown I used 12% Honeycomb Infill with 4 outside parameters.
The charcoal basket can be printed standing up. The small overhangs bridge just fine.
Note the basket Model was increased in size by a mm in height and width to create a snug fit with the body.
The main body holding the basket can be printed flat very easily.
Assembly:
I simply assembled Body, Cover and Fan using Zipties, but I guess screws should also work or these small rubber thing that come with Noctua fans for example.
Happy printing and air filtering.
Cheers