1 / 6
7" Field Monitor Case w/zip tie anchor points — zdjęcie 1
1 / 6

7" Field Monitor Case w/zip tie anchor points

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Field Case for 7" HDMI Raspberry Pi Monitor

Ocena
0 / 5
Polubienia
11
Pobrania
126
Wydruki
0
Wyświetlenia
1103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

I periodically find myself needing to check the HDMI output of something whether it's a computer, an nvr, or something fun like a raspberry pi. This was designed for 7" monitors and fits the 7" ‘raspberry pi’ display that I found on Amazon. The case is built in two pieces - a base and an interlocking bezel (see pics). I also added on some anchor points for zip ties that are a bit elevated in case you want to use screw-down zip ties and attach it to a wall somewhere, or if you want to temporarily attach it to some other gear like a rack. To find the monitor on Amazon, search for ‘7 inch raspberry pi screen’ - sold by HMTECH. 

I printed this on a Creality Ender S 3d using generic matte black PLA. I only printed supports under the zip tie anchors.

Tagi